Home / Product Ranges / General industrial (solvented)

Solvented general industrial

One-coat systems

Primers

Finishes

One-coat systems

CF100 Compliant Finish
A range of compliant solvent based air drying/force drying colourcoats based on high solids resins and durable pigments, which exhibit exceptional early water resistance.
Formulated for spray application onto suitably prepared ferrous surfaces.
Developed specifically as a VOC compliant coating for suitably prepared steel surfaces.

Usually a single coat system. Where further protection is required, the surface may be primed with:

Speedspray QDH Primer
[top]

Hammercote Hammer Finishes
...high quality styrenated alkyd based enamel available as a hammered metallic finish or a smooth finish. It is a one coat system ideally suited for the decoration and protection of metal work. It is non yellowing, fast drying and oil and grease resistant when fully dried. A colours are lead free.
...for all metal equipment such as tools, casings, metal furniture, gates and railings, interior and exterior. High film build when brushing ensures excellent corrosion resistance.

One-coat system, but may require the following:

Etch Primer (Two Pack)
[top]

Hi Solids Holding Primer Black
...high performance compliant high solids solvent based air drying anti-corrosive one coat finish based on a modified alkyd resin.
...air-drying transit coat for airless spray application onto steel pipes and tubes, in applications where the use of a water based coating is not possible.

Can be over-coated with most single pack intermediates.
[top]

Silicone HT600 Enamel
...specialised product based on a pure silicone resin pigmented with aluminium flake for high temperature service.
...can be used on surfaces up to 600°C.
...boiler pipes, flare stacks, fire surrounds, exhaust pipes, auto manifolds and most metallic surfaces subject to high temperature.

Usually a one-coat system.
[top]

Speedcoat MD60 Compliant Coating
...direct primerless coating
...specially formulated single application high build compliant coating based on a fast drying high solid alkyd resin.
...excellent chip resistance, corrosion and seawater resistance, verified by salt spray and humidity evaluations.
...for containers, machinery and general steel fabrications used in marine, industrial and other aggressive environments. Ideal for mechanically prepared surfaces.

Not recommended with other products.
[top]

Speedcoat MD90 Compliant Coating
...direct primerless coating used if a high gloss version of Speedcoat MD60 Compliant Coating is required.
...specially formulated single application high build compliant coating based on a fast drying high solid alkyd resin.
...excellent chip resistance, corrosion and seawater resistance, verified by salt spray and humidity evaluations.
...for containers, machinery and general steel fabrications used in marine, industrial and other aggressive environments.

Not recommended with other products.
[top]

Two Pack Non Isocyanate Lacquer (Coloured)
A two pack non isocyanate cured acrylic lacquer. Gives excellent build and gloss. Formulated using the highest quality European acrylic resins combined with UV inhibitors and the latest flow agents in a specially designed solvent blend.

Suitable for automotive and industrial usage. This clearcoat has been designed to work solely in conjunction with 2K Non Isocyanate Curing Agent.
[top]

Primers

Two Pack Yellow Etch Primer (N4700-2-1)
...air drying anticorrosive etching primer based on a modified vinyl resin designed to promote adhesion to metallic substrates.
...an effective adhesion promoter for ferrous and non ferrous substrates, particularly aluminium.

Can be overcoated with a range of finishes.
[top]

Chlorinated Rubber Zinc Primer MZ70
...chlorinated rubber primer which gives high cathodic protection with 70% metallic zinc in the dry film. It exhibits superb adhesion and anti-corrosion properties in extreme environments. This product can be applied down to 0YC.
...for new construction and repair work on superstructures, steel fabrications etc. where a chlorinated rubber finish is to be used and maximum corrosion resistance is required.

Recommended systems:

Chlorinated Rubber Finishes
[top]

Chloriphos Primer
...medium to high build chlorinated rubber primer with a high degree of corrosion resistance for outstanding performance on ferrous structures in aggressive environments.
...this product is highly impervious to water.
...as part of the chlorinated rubber system, Chloriphos gives ideal anti-corrosive properties to metalwork, superstructures, hulls and agricultural equipment where high humidity and aggressive exposure conditions are present. This product can be applied down to 0YC.

Recommended systems:

Chlorinated Rubber Finishes
[top]

Epoxy CM10 Anticorrosive Primer
...two pack polyamide cured epoxy primer with highly effective anticorrosion properties, designed for application to blasted steel in pre and post fabrication stages and as a maintenance primer for mechanically cleaned steel in exposed and aggressive environments.
...product is also weldable (see certification/approvals) and moisture tolerant.
...versatile fabrication and maintenance primer for industrial locations, chemical plants and general fabrication work where a good value but effective protection is required.
...can be left for up to six months before overcoating with a wide range of products.

Recommended systems:

Bondon 112

Bondon 116

Bondon 168

AD100 Finish

PU100 Finish

Epoxy Finishes
[top]

Epoxy Zinc Primer (1 Pack)
...single pack epoxy shop primer with a high zinc content for the protection of steel structures against corrosion during construction.
...ideal for blast cleaned steel where a fast drying time is required.
...an be overcoated with a variety of topcoats.
...can be used for the maintenance of zinc based primers.

Recommended systems:

Bondon Primers

Bondon Topcoats

AD100 Finish

PU100 Finish

Epoxy Finishes
[top]

Etch Primer (Single Pack)
...ideal shop primer for ferrous and non ferrous surfaces.
...rapid drying PVB based acid cured etch primer for steel and aluminium.
...bonds strongly and provides a suitable base for a wide range of topcoats. Can be overcoated with epoxy, alkyd, CR and polyurethane primers and topcoats.

Specified with all main primers and topcoats.
[top]

Etch Primer (Two Pack)
...ideal for ferrous and non-ferrous surfaces requiring high performance etch bonding.
...high performance twin pack acid cured etch primer with excellent keying properties into steel and aluminium surfaces prior to full painting schedules.
...rapid drying and accepts all standard paint systems.

Specified with all main primers and topcoats.
[top]

Farmline Primer
...a range of air drying alkyd based primer/undercoats primarily suitable for brush application to various substrates.
...suitable as a primer or undercoat for the finish or refurbishing of agricultural or vehicle exteriors in conjunction with Farmline or Procover finishes.

Recommended systems:

Farmline

PU100 Finish
[top]

Hi-dur Zinc Phosphate Primer
...steelwork primer prior to industrial and marine topcoats.
...alkyd based versatile zinc phosphate anticorrosive primer, which gives a high level of protection and adhesion to steelwork.
...contains no lead additives and is of low toxicity.
...can be re-coated with most air-drying finishes.
...finds use in all environments, agricultural, industrial, and marine and can be used on non-ferrous metals in conjunction with Etch Primer.

Recommended systems:

Steel (Conventional System)

Hi-dur Zinc Phosphate Primer

PU100 A.C.E. Finish

Coloured Solution (alternative finish)

Steel (Extended Life)

Hi-dur Zinc Phosphate Primer

Standard MIO Primer (used as an intermediate)

PU100 A.C.E. Finish

Coloured Solution (alternative finish)

Aluminium

Etch Primer (Two Pack)

Hi-dur Zinc Phosphate Primer (used as an intermediate)

PU100 A.C.E. Finish

Coloured Solution (alternative finish)
[top]

Konvertex
...converts sound or firm rust into a stable substrate that resists further surface oxidation.
...a primer where only limited surface preparation is possible.
...for use on railings, gates, guttering, drainpipes, pipework, piperacks, tank externals and most general steelwork not immersed.

Recommended systems:

Xylene based

Speedspray QDH Primer

AD100 Finish

White Spirit based

Hi-dur Zinc Phosphate Primer

PU100 Finish
[top]

N4900 Range - ADE E/S Primer
...air-drying anti-corrosive primer based on a modified alkyd resin formulated for spray application.
...for conventional handheld, electrostatic and automatic spray equipment onto suitably prepared ferrous substrates.

Recommended systems:

Etch Primer (Two Pack)

AD100 Finish

MD100 Finish

ADE H/B Gloss (N4000 Range)
[top]

Plicote HB MIO Primer
...high build acrylated rubber MIO primer with a high degree of protection to ferrous structures.
...for use in aggressive chemical, UV and marine environments.

Plicote Zinc Phosphate Primer

Plicote Finishes
[top]

Standard MIO Primer
...phenolic modified alkyd coating containing micaceous iron oxide which provides toughness and abrasion resistance on industrial structures.
...medium build coating is an effective primer/intermediate barrier to give maximum protection on exposed steel work.
...bridges, tank exteriors, castings, steel fabrications and industrial structures as a primer/intermediate coating which can be overcoated with conventional alkyd top coats.

Recommended systems:

Hi-dur Zinc Phosphate Primer

PU100 Finish

Coloured Solution
[top]

Speedspray CM5 HB Zinc Phosphate Primer
...fast drying high build modified alkyd zinc phosphate primer with good adhesion, corrosion resistance and enamel hold out properties, which is designed for application onto steel surfaces.
...ideal for cost sensitive environments and fast turnaround operations.
...metal fabrications, process equipment, machine tools and other surfaces where fast drying and high build properties are required.

Recommended systems:

Etch Primer (Two Pack)

AD100 Finish
[top]

Speedspray QDH Primer
...fast drying universal high build modified alkyd zinc phosphate primer.
...good adhesion and corrosion resistance, and is designed for application to most surfaces.
...excellent drying and enamel hold out, which makes it an ideal base for Hi-Dur AD100 Finish.
...primer for metal fabrications, agricultural equipment, machine tools and most other surfaces where fast drying properties are required.

Recommended systems:

Etch Primer (Two Pack)

AD100 Finish
[top]

Finishes

Acrylic Clear Lacquer
...fast drying acrylic clear lacquer of excellent colour and gloss retention with particular resistance to U.V. attack.
...durable tough finish which is ideal for adverse weather environments.
...exterior and interior applications on wood, metal and most other receptive surfaces where good durability and non yellowing characteristics are required.
...provides a good protective system for Farglo Fluorescent Paint.

See also:

Farglo Fluorescent Paint

Lumiphos Epoxy Coating
[top]

AD100 Finish
...high quality, fast drying, medium build finish based on a short oil modified alkyd resin which produces a hard, glossy coating. This product exhibits high durability, gloss retention and resistance in industrial and agricultural environments.
...dry times are short, therefore overcoating times are reduced, giving a fast turnaround in application.
...machinery and plant, agricultural equipment, general fabrications and machine tools where a premium gloss is required.

Specified with:

One-Pack Epoxy Zinc Primer (steel - conventional)

Speedspray QDH Primer (steel - extended life)

Two-Pack Etch Primer (aluminium)
[top]

ADE H/B Gloss (N4000 range)
...air-drying topcoat formulated for spray application onto suitably prepared surfaces. Ideal for use as a low cost system
...modified alkyd based resin system, containing weather resistant pigments, suitable for application onto a variety of suitably prepared steel substrates.

May be specified with the following where further protection is required:

Speedspray QDH Primer
[top]

Bright Aluminium Paint
...high quality heat resistant aluminium paint for decorative and protective use on metalwork. Based on a modified hard resin system pigmented with leafing aluminium to provide good protection and a bright metallic finish.
...withstands heated surfaces up to 150°C.
...can be used on most metal surfaces such as ducting, chassis members, tank exteriors, pipework and in a solar reflective role where excessive temperatures need to be limited.

Recommended primers:

Hi-dur Zinc Phosphate Primer

Etch Primer (Two Pack)
[top]

Speedspray QDH Primer
[top]

Chlorinated Rubber Finish
...A well served product based on chlorinated rubber giving high chemical resistance. Used in high humidity environments and aggressive exposure conditions. The products perform well on most types of substrate including concrete. Other features include high intercoat adhesion, low moisture permeability and resistance to acids alkalis, oxidants and sea water.
...Where chemical and water resistance are required in aggressive environments. May be applied to most metal surfaces, asbestos and concrete. Ideal for agricultural equipment, fabrications, superstructures, roofs, ship topsides and swimming pools.

Chloriphos Primer

Chlorinated Rubber Zinc Primer MZ70

Floorcote Rubberised Sealer

Stormcote Rubberised Sealer
[top]

Epoxy Finishes
...proven track record giving maximum protection against abrasion, solvents and chemicals in high wear and aggressive exposure conditions.
...ideal for marine, industrial and chemical environments on steel and concrete.
...olyamide cured two part epoxy systems of medium-high build pigmented with light stable, chemically resistant and durable colours. Available in standard and hi-build versions.
...in conjunction with epoxy primers and intermediate coats, the products are suitable for metal fabrications, gas bottles, offshore structures, pipes, drainage systems and most steel and concrete surfaces.

Recommended systems:

Floorcote Epoxy Sealer

Epoxy CM10 Anticorrosive Primer
[top]

Farglo Fluorescent Paint
...highly reflective fluorescent coatings designed for specific areas where a high degree of visibility is essential.
...highly transparent and durable fluorescent pigments dispersed in a non yellowing alkyd binder in four vivid colours.
...can be applied to wood, metal and concrete.
...colour brilliance will not fade and is active to both U.V. and daylight.
...safety equipment, warning signs, docking points, fire equipment, vehicle tailboards and marker buoys.

Recommended systems:

Chlorinated Rubber Finishes

Acrylic Clear Lacquer
[top]

Lumiphos Epoxy Coating
...high performance polyamide cured two part epoxy system pigmented with a photo luminescent pigment giving a long afterglow.
...ideal for marine, industrial and chemical environments on steel and concrete.
...marking of staircases and escape routes in emergency situations. Also for marker buoys and other maritime applications.

Recommended systems:

Bondon 111

Acrylic Clear Lacquer
[top]

Farmline
...fast air drying enamels designed for the coating and refurbishing of agricultural, horticultural and construction machinery components. Based on a pure drying, oil modified alkyd blend with urethane in mixed hydrocarbon solvent.
...primarily suitable for brush and some spray application.
...for finishing or refurbishing machinery components to give a high quality durable finish, particularly where brush application is required. Optimum durability is achieved when used in conjunction with primers.

Specified with:

Farmline Primer

Hi-dur Zinc Phosphate Primer
[top]

GP Industrial Gloss
...traditional alkyd based gloss finish for general use, where good covering, gloss and durability are required. Ideal for building and industrial use, both interior and exterior on many surfaces.
...all colours are lead free and this product is compliant.
...for interior and exterior surfaces including new and previously painted wood, metal, brick and stone where an economical finish is required. Ideal for general painting and for industrial and agricultural use.

See also:

Standard Wood Primer

General Purpose Undercoat
[top]

Industrial Silicon Alkyd
...durable exterior quality enamel based on a silicone modified alkyd, containing durable and light fast colour pigments.
...suitable for metal components, the silicone modification provides weather resistance and high wear character.
...metal components which may be subject to high wear or severe weathering environments. Excellent for use on large ferrous structures such as gasholders.

Recommended systems:

Hi-dur Zinc Phosphate Primer

Standard MIO Primer
[top]

MD100 Finish
...high quality, medium build finish based on a short oil modified alkyd resin that produces a hard, glossy coating. This product exhibits high durability, gloss retention and resistance in industrial and agricultural environments.
...dry times are longer than Hi-Dur AD100 Finish, therefore larger equipment can be coated without the danger of dry spray.
...large machinery and plant, large agricultural equipment and large general fabrications where a premium gloss is required.

Specified with:

One-Pack Epoxy Zinc Primer (steel - conventional)

Speedspray QDH Primer (steel - extended life)

Two-Pack Etch Primer (aluminium)
[top]

Plicote Finishes
...a product range based on acrylated rubber giving good weathering properties and adhesion. Used in aggressive exposure conditions, the products perform well on most types of metal surfaces.
...available in two finishes - Standard and Hi-Build.
...where anticorrosion protection and adhesion are required in aggressive environments. May be applied to most metal surfaces. Ideal for agricultural equipment, fabrications, superstructures, roofs and ships topsides.
...due to the mild solvent content, this product is ideal for overcoating and repairing previously painted surfaces with minimal risk of film softening.

See also:

Plicote Zinc Phosphate Primer

Plicote MIO Primer
[top]

PU100 A.C.E. Finish
...high quality, medium build finish based on a polyurethane modified alkyd resin. The product is suitable for all types of application (brushing, hot spray etc.) and is ideal for repairers and original equipment manufacturers.
...good through drying and fast re-coat properties, excellent gloss and offers a superb long life finish with good resistance to chemical washing and chipping.
...all agricultural equipment, general fabrications, trailers and coach bodies of any size.

Specified with:

Hi-dur Zinc Phosphate Primer
[top]

Purlac Polyurethane Enamel
...two pack polyurethane high durability finish with maximum performance and durability characteristics. Allows quick turnaround due to rapid film hardening with excellent chemical and solvent resistance.
...suitable for commercial and industrial usage where a high durability finish is required.

Recommended as a finish coat over epoxy primers and some alkyd primers.
[top]

SA200 O.E.M. Finish
A highly durable exterior quality finish based on a silicone modified alkyd resin which provides outstanding weathering properties and wear resistance.
...can also be used as a heat resistant coating, withstands heated surfaces up to 200°C.
...Ideal coating for machinery and agricultural equipment where high durability is required.

Usually a one-coat system, steel work can be primed with:

Speedspray QDH Primer
[top]

Siliconised Alkyd Enamel
...highly durable exterior quality enamel based on silicone alkyd, containing durable and light fast colour pigments.
...suitable for metal components, the silicone modification provides weather resistance, high wear character and resistance to temperatures of 180°C.
...metal components which may be subject to high wear or severe weathering environments and extremes of temperature.
...can also be used on boiler pipes, flare stacks, domestic radiators and exterior fabrications, tanks and components.

Recommended primers:

Hi-dur Zinc Phosphate Primer

Standard MIO Primer
[top]

[ top ]

Main Menu

Related Links

Solvented general industrial

One-coat systems

Primers

Finishes

Site Search

Quick Links

Acothane

Floorcote